Mansew Button & Button Hole Sewing Machines

                Button Hole &
          Button Sewing Machines
                Prices are subject to change without notice

B-373NS High Speed Button Sewer Machine with a Thread Trimmer and New Style Stop Motion and Clamp.
$1,650.00 with Pedestal Stand & ESM-400 Motor

TO ORDER
CREDIT CARD AUTHORIZATION FORM

For Four or Two Hole Buttons.
High Speed, single thread button attaching machine for two or four hole flat buttons. A thread trimmer knife and automatic clamp lift. This quality machine is designed for production sewing. Available options include attachments for shank type buttons or tacking clamps.

Optional clamps for shank-stay-wrapped buttons and snap fasteners available.

Shown with optional ESM-400 Servo Motor

ARTISAN 373
INSTRUCTION MANUAL

373H Hand Operated Button Attaching Machine
$1,495.00 With Table & Stand.
TO ORDER
CREDIT CARD AUTHORIZATION FORM

Machine is designed to be used by dry cleaners, laundry, or alteration room where there is a need to replace flat buttons quickly by almost anyone. Features include a thread trimmer knife and an automatic button clamp lift.

Recommended Needles 175x1 #14 to #22

373H Hand Operated Button Attaching Machine

JUKI LBH-1700SB/MC600B $6,995.00

TO ORDER
CREDIT CARD AUTHORIZATION FORM

Computer Controlled Lockstitch Buttonholing Machine

A conventional mechanical lockstitch buttonholing machine controls stitching shapes with its main cam. With JUKI's unique computer control technology, the LBH-1700 lockstitch buttonholing machine is the first in the world to incorporate mechatronics parts for the control of stitching shapes. The machine is provided as standard with six different stitching shapes, including a "square shape" that matches men's shirts, a "round shape" that matches ladies' blouses, and a "radial square shape" that can't be sewn with conventional mechanical machines. Various settings can be easily adjusted on the multi-functional operating panel. These include not only sewing specifications such as the material cutting length, overedging width, and bartacking width, but also operation mode settings such as the changeover between single stitching and double stitching. And to further improve seam quality, flexibility, operability, and productivity, the machine also debuts JUKI's unique leading-edge technologies such as the directly driven machine head, the electronic thread-tension-control system (active tension) that makes it possible separately establish and store thread tensions for parallel sections and bartacking sections of lockstitch buttonholes, and the feed and needle rocking mechanism that uses a pulse motor.

JUKI LBH-1700 Computer Controlled Button Hole Machine

Click to Enlarge

Juki LBH-1790
Lockstitch Buttonhole Machine

$7,750.00

TO ORDER
CREDIT CARD AUTHORIZATION FORM

The machine eliminates oil stains on the sewing product.

	Thanks to our advanced dry-head technology, no lubrication is required except for the hook section. This eliminates oil stains on the sewing product.

	The machine can be completely changed into a dry-head machine by replacing the hook with an optional non-lubricated hook. (In this case, the maximum sewing speed will be 3,300rpm.)

	Needle thread tension for sewing parallel and bartacking sections of buttonholes can be separately controlled through the operation panel and stored in memory according to various sewing conditions (e.g., type of thread, type of material and sewing speed).

	The machine is able to change the needle thread tensions at the parallel and bartacking sections of the buttonhole, to produce a beautiful buttonhole shape. This capability helps greatly in preventing thread breakage.

	Needle thread tension is activated at the beginning and end of sewing. This prevents unthreading of the needle thread, and thread fraying that is likely to occur at the beginning of sewing.

	Thread tension for basting stitching can be specified separately.

Sewing settings can be easily changed.

Purl stitching

Whip stitching

State of first-round stitch

Finished state of double stitching

(For a changeover between purl stitch and whip stitch, threading of bobbin, as well as the bobbin thread tension need to be changed.)

•	For double stitching, the bartacking section is skipped and only the parallel sections are sewn twice. This prevents any excessively tight finishes in the bartacking section of the buttonhole.
•	First- and second-round stitches can be sewn using different stitch widths

Thanks to the multiple knife-dropping function, it is no longer required that the knife be changed at the time the buttonhole size is changed. The number of knife dropping times can be automatically set according to the buttonholing size in cases where the buttonhole size is frequently changed for small-lot productions or during the cycle sewing of buttonholes that are different in size.

The double-acting solenoid type knife mechanism is free from the faulty dropping/returning of the knife. In addition, the knife pressure can be changed according to the material to be sewn.

The knife supports sewing lengths of 41mm at the maximum. In addition, knife mechanisms for 70mm and 120mm are optionally available. With this, slots such as the belt holes of child seat belts can be buttonholed.

Shorter length of bobbin thread remaining on the material.

	The new model of the bobbin thread trimming mechanism cuts the bobbin thread so that it leaves a shorter length of thread on the material. Furthermore, the machine produces bartacks at the end of sewing, thereby preventing finished seams from coming undone.

	With the soft-start function, the number of stitches, as well as the sewing speed at the start of sewing can be specified, thereby preventing the needle thread from slipping off from the needle eyelet. (From the first to the fifth stitches, the sewing speed can be specified on a stitch-by-stitch basis.)

The machine is equipped with a multiple knife-dropping function.

Cycle sewing and continuous sewing.

Cycle sewing

Twenty different programs can be registered, and as many as 15 different patterns can be stored in one program.

Continuous sewing

The machine is able to continuously sew two or more different patterns without requiring the work clamp foot to be lifted. As may as 20 programs can be registered, and six different patterns can be stored in one program.
(Related parts need to be exchanged for optional ones.)

Easy threading.

The needle bar can be shifted to the rightmost end position with the work clamp foot lowered.
This facilitates threading of the machine head.


Position of the needle bar during sewing

Juki LBH-780 Series
Lockstitch Buttonhole Machines
3,600 spm

LBH-782U 1/4" - 1 $4,150.00 (Head Only)

TO ORDER
CREDIT CARD AUTHORIZATION FORM

LBH-783U 1/4" - 1-1/4" $4,150.00 (Head Only)

LBH-784U 1/2" - 1-1/2" $4,150.00 (Head Only)

TO ORDER
CREDIT CARD AUTHORIZATION FORM

JUKI LK-1903/BR-25 $13,500.00

TO ORDER
CREDIT CARD AUTHORIZATION FORM

Electronic Button Sewing Machine With Tabletop Control Panel And Automatic Button Feeder
For extra small- to large-sized buttons.
33 standard patterns to choose from, including
4 patterns for 3-hole button sewing.
Sewing speed up to 2,500 spm and a work clamp lift up to 13 mm.
Sewing Speed max. 2,500 spm
Work Clamp Lift max. 13 mm
Needle Bar Stroke 41.2 mm
Needle DPx17 #14
Hook standard semi-rotary hook
Button Size subclass 301: 10 - 20 mm
subclass 302: 10 - 20 mm
subclass 303: 15 - 32 mm
subclass 304: 8 - 15 mm
subclass 305: max. 20 mm